Description

SAFE & SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Car Jump Starter with Air Compressor 1500A Battery Power Bank Charger Emergency Product Description Features. 1. Emergency power hitch, up to 5-15 times or so, combined with different displacement models 2.Carrying 22 cylinders, large cylinder, filling speed, can be used for home use, can also be used for automobiles 3. Can be used for emergency lights, with a variety of light modes, combined with the use of different situations 4. Petrol, diesel version can be universal ignition 5. Large-capacity battery design, long-lasting life 6. Storage box material is strong and durable, easy to store, not easy to hurt the equipment or lost 7. All-in-one design, is the performance of the new wave, convenient and powerful 8. Inflatable capacity can be set, safe and reliable. 9. Screen display design, easy to grasp, easy to set up at a glance Specification Product Model: BN03 Battery capacity: 20000 mAh Measurement accuracy: earth 1.0PSI Type-C input: 5V=2A Pressure unit: PSI.BAR, KPA, KG/CM2 Working voltage: 14.8V Length of outer gas tube: 320MM earth 10MM Maximum current: <6A Working temperature: -20℃~60 LED light lumen value: 20LM Product size: 181*93*53mm Maximum inflatable pressure: 150PSI Host weight: 800g USB-A output: 5V=2.4A Function: Emergency lighter/tyre inflator/emergency torch/charging treasure 【Emergency Hitch Lighting/Lighting】 Start peak: 1000A Firing times: full power normal times up to about 5-15 times, combined with different displacement car models Applicable categories of models: 12V general-purpose models Applicable models: car / SUV / pickup truck / commercial vehicle / minivan / minivan (12V) / small yacht, etc. Applicable displacement: Maximum support 12V 5.0L displacement petrol car / maximum support 12V 3.0L displacement diesel car Light flash mode: normal light / alarm SOS mode / burst flash mode Inflate mode: car tyre inflation about 5-6 minutes, under full power, it can support about 10 tyres to inflate, combined with different tyres capacity depends Emergency hitch/fire: the normal number of full power up to about 5-15 times, combined with different displacement car models Emergency starting power supply instructions This product is suitable for: 12V system vehicles How to start the car: Before using this product to start the car, you need to fill the electricity, generally as long as more than 75% can start the car. Connect the positive and negative terminals of the matching battery clip with the positive and negative terminals of the car battery. The red clip is for the positive terminal of the battery and the black clip is for the negative terminal of the battery. Then insert the plug of the battery clip into the starter output port of the product, and then turn the car key to the starter gear or press the car starter button. After successful starting, unplug from this product first, and then remove the battery clip from the car battery. If it does not start successfully, please wait for 1 minute and then repeat the above steps. Operation flow As follows: 1, Use the matching clip to connect the car battery first; 2、Battery clip plug into the corresponding hole of this product; 3、Start the car: 4, Unplug the battery clamp plug from this product; 5, Remove the clip from the positive and negative terminals of the car battery. Precautions for emergency starting power supply: 1, Please fully charge it before each start, make sure the power is sufficient (more than 75%); 2, the red clamp fully clamp the positive (+) pole of the battery, black clamp fully clamp the negative (-) pole of the battery (very important); 3、Insert the battery cable connector fully into the EC5 interface of this product; 4、After the car is started, please unplug it within 30 seconds and then remove the battery clamp clip; 5、Please do not start continuously, the starting time should not exceed 5 seconds. The unsuccessful start should be more than 1 minute interval before the second start (please do not start continuously, very important); 6, before starting the car, please turn off all electronic devices in the car, such as: air conditioning, lights, entertainment systems. Inflatable pump instructions: Connect one end of the air hose to the air pump and screw the other end onto the tyre valve core. For French valve cores, add the conversion connector. Intelligent control type air pump with LCD display, you need to press "W" to activate the power supply and LCD screen to set the air pressure, and then automatically shut down the machine in 60 seconds. 1.Unit adjustment Press "O" key, you can freely adjust in PSI, BAR, KPA, KG/CM2, four units." and "-" and "-". and "-" for the pressure preset key, point and press for slow adjustment, long press fast adjustment, set to the appropriate pressure Press and hold for slow adjustment, press and hold for fast adjustment, set the pressure to the right value, blinking for 5 seconds to complete the setting automatically and then press the pump power switch "W" to start inflating. 2. When the inflation reaches the set value, the intelligent control air pump will stop inflating automatically. 3. SOS emergency and LED press " " switch. 4. When inflation is finished, pay attention to the temperature of the air tube, after cooling down, one end of the air tube will be quickly rotated out from the valve core first, and the other end will be rotated out from the host. 5. The charging time of the air pump is 3-5 hours. 6. Charging treasure function: close the machine black screen state before using the USB output mobile phone charging function. 7. Ball inflation instructions: when using the air needle to inflate the ball, please note: the air needle should not be completely stuffed into the inflatable hose, otherwise it will block the inflatable mouth, resulting in failure to inflate. The correct way should be: the mouth of the air needle is flush with the mouth of the inflatable hose. Package Included Copyright © 2022 Tongtool